好吧，现在让我们来看看如何设置一些警报并想知道在哪里设置。
Okay now for some Biggerstaff let's look at setting up some alarms and wonder where.

所以我要做的第一件事就是去掉我的矩形我的滑块我会在屏幕上给自己一点空间，然后如果我们点击图形我会首先要去做简单的事情。
So first thing I'm going to do is I'm going to get rid of my rectangle my slider I'm going to just kind of give myself a little bit of room on my screen and then if we click into graphics I'm going to go for the easy stuff first.

我将点击我的警报事件工具，然后将其拉到此处。
I'm going to click on my alarm event tool and I'm just going to pull that up right here.

现在我已经可以看到我的警报了。
So now I've already got visibility on my alarms.

那很简单。
That was easy.

然后我想要一种方法来重置和静音这些，但我可以用我自己的按钮提供它。
And then I'm going to want a way to reset and silence those but I can provide that with my own pushbutton.

在某些时候，每当我现在不真正担心这个问题时，我只会担心屏幕上显示警报。
At some point whenever I'm not going to really worry about that right now I am just going to worry about getting an alarm to show up on my screen.

创建该工具后，我需要做的第一件事是我想来到这里执行任务，您可以在此处看到。
The first thing that I need to do after I create that tool is I want to come down here to tasks and you see right here.

我有一个警报文件夹，右键单击该文件夹并将其插入此处，它要求我提供标签名称。
I have a folder for alarms lets right click on that and insert here it's asking me for a tag name.

我还没有创建任何警报标签。
I don't have any alarm tags created just yet.

所以我现在要继续创建一个，我将其称为 L-L 级。
So I'm going to go ahead and create one right now and this one will be I'll just call it level L-L.

所以这将是一个低级别警报。
So this is going to be a low level alarm.

当然，这会与一点相关。
And of course that's going to be associated with a bit.

然后我会继续击球。
And then I'll go ahead and hit.

好的，然后我将点击它以确保这就是我们所选择的，我们将把它视为一个高点。
OK then I'm going to click on that to make sure that's what selected we are going to treat this like a high high.

事实上，我将把所有警报视为高高的警报，因为我总是使用位。
In fact I'm going to treat all of my alarms like high highs because I'm always using bits.

每当我的位超过某个限制时，该限制将是第五点，因为我正在处理简单的数字信号，这些信号要么是 0，要么是 1。
Any time my bit is over a certain limit and that limit is going to be point five because I'm working with simple digital signals which are either 0 or 1.

因此，即使我看到的是低水平警报，当我在这里设置它时，它也会是高水平警报。
So even if I'm looking at a low low level alarm it's going to be a high high when I set it up in here.

信息将是你的坦克已经低了。
And the message will be your tank is low.

开始了。
Here we go.

当我把坦克拼写正确时，我看起来至少脑子里还有一点理智。
And when I spell tank right so I look like I have at least an iota of sense in my head.

这就是我真正需要在这里设置的一切。
That's all I really need to set in here.

我确实想确保我有这种显示和警报控制。
I do want to make sure that I've got this displaying and alarms control.

我不会在此处添加任何烦人的蜂鸣声，但您已经可以看到电子邮件通知以及可以在此处添加的各种额外内容。
I'm not going to put any kind of annoying beeps on here but you can already see there's e-mail notifications and all kinds of extra things you can put on here.

但现在我们并不担心这一点。
But right now we're not worried about that.

我们只是要设置这个东西。
We're just going to set this thing up.

现在我已经知道了，我要到这里保存所有内容并将其保存为图纸编号。
So now that I've got that I'm going to come up here and save all and save this as a sheet number.

这将是第一页，然后我可以关闭它。
This will be sheet one and then I can close that.

现在，如果您还记得我设置了一个标签，但我尚未在驱动程序中设置它，那么我需要在此处设置该标签。
And now if you remember I set up a tag but I didn't set it up in my driver yet so I need to set that tag up right here.

这对我来说是 L-L 级别。
That's going to me my level L-L.

让我们进入 Arrius 逻辑，看看这到底是什么。
And let's go into Arrius logic's and see what that bit actually is.

那么，让我们到这里来，报警器的储水箱低低，即 12 人的 B-3。
So let's come down here and alarm's storage tank low low that's B-3 for 12.

所以我会来这里并在 B-3 调用和 Slash 12 中输入该内容。
So I'll come right here and type that in B-3 call and for Slash 12.

这很好。
And that's good.

让我们继续保存所有内容，然后我就可以离开这里了。
Let's go ahead and save all and I can close out of here.

我想我已经准备好运行这件事了。
And I think I'm ready to run this thing up.

所以我要开始奔跑并确保我们已经建立了通讯并且还有我的油箱液位。
So I'm going to hit run and make sure we've got communications and yet there's my tank level.

所以现在让我们继续回到休息逻辑，我将手动创建不受欢迎的低水箱液位。
So now let's go ahead and go back into arest logic's and I'm going to manually create and undesirably unacceptably low tank level.

让我们返回来看看该警报是否没有出现在我的屏幕上。
And let's pop back in and see if that alarm doesn't appear on my screen.

嘿看看那个。
Hey look at that.

所以现在我有一个低低级别警报，这就是设置这些东西所需要的。
So now I've got a low low level alarm and that is what it takes to set these things up.

然后我就可以到这里来，点击这个东西，它就会变成绿色。
So then I can come over here and I can click on this thing and it turns green.

这并不意味着我的闹钟消失了。
That doesn't mean my alarm is gone.

这只是意味着我已经承认我已经看到了它。
That just means I have acknowledged that I've seen it.

然后，如果我回到这里，让我们摆脱那个警报，那么我将进入我的审查选项卡，我将瞄准我的警报重置，使那个东西消失，并且我的水箱液位足够高，现在就是这样除非我成功，否则我不会回来。
Then if I go back over here and let's get rid of that alarm so I'm going to go into my review tab and I'm just going to target my alarm reset to make that thing disappear and my tank levels high enough now that that's not going to come back unless I make it.

现在我的警报消失了。
And now my alarm has disappeared.

就像这样，您可以在通知处理中设置警报并确认，一切都是桃子和奶油。
Just like that you can set up alarms inside of your notify deal with acknowledgement and everything is peaches and cream.

这就是这个非常简单的讲座，我们将在未来两年内见到您。
That's it for this really simple lecture and I will see you in the next two years.